Factory resetting the router:
You can reset your Aria 2210 router by PRESSING and HOLDING the reset button on the back until the status lights alternate between red, green and blue. This process would take approximately 10-15 seconds and would require paper clip or SIM removal tool to press the reset button.
Once your router is reset, use the "How do I setup my Aria 2210 Router" setup guide to setup your router.
Understanding the light patterns of the router:
Hitron Aria 2210
|
LED Colour |
LED Status |
Description |
|
Green |
Slow Pulsing |
Booting |
|
Green, White |
Alternating |
Attempting to pair with gateway/receiving settings from the gateway |
|
White |
Slow Pulsing |
Ready to begin pairing |
|
White |
Solid |
Paired and connected to the gateway (normal operation) |
|
Red, White |
Alternating |
Searching for paired gateway |
|
Amber |
Solid |
Wireless connection to gateway is weak |
|
Red, Green, Blue |
Cycling |
Executing factory reset |
|
Cyan, White |
Alternating |
Software upgrade in progress (DO NOT power off or disconnect from paired gateway during this pattern) |
|
Cyan |
Solid |
Connected to the gateway via ethernet, but extender WiFi radios are disabled |
|
Cyan |
Blinking |
Pending software update configuration |
|
Red |
Solid |
Hardware Failure |
